Lanner LEC-7900 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačový hardware Lanner LEC-7900. Lanner LEC-7900 User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - LEC-7900D

LEC-7900D User Manual 1 © Copyright 200  that the room LEC-7900D User

Strany 2

LEC-7900D User Manual 9 2.2 LEC-7900D(LEB-7900D) System Board LEB-7900D is the system board bundled with the LEC-7900D Fanless Embedded System

Strany 3 - Safety Guidelines

LEC-7900D User Manual 10

Strany 4 - EMC Notice

11 2.3 Jumper setting and Pin Assignment VGA1: Internal VGA Connector Pin No. Description Pin No. Description Pin No. Description 1 CRT-R 6

Strany 5

12 LANB1 / LANB2 Description Pin No. Fast E-Net Giga Net 1 TX+ MD0+ 2 TX- MD0- 3 RX+ MD1+ 4 T45 MD2+ 5 T45 MD2- 6 RX- MD1- 7 T78

Strany 6 - 1.1 Product Introduction

13 COM1: Internal COM1 ( D-SUB9) Connector PIN NO. DESCRIPTION 1 Data Carrier Detect ( DCDA # ) 2 Receive Data ( RXDA ) 3 Transmit Data ( TX

Strany 7 - 1.2 Specifications

14 CON1 : 4-Pin Power Connector (Small-4P ) Pin No. Description 1 5V 2 Ground 3 Ground 4 12V CN6 : Compact Flash Connector PIN DESCRIPTI

Strany 8 - LEC-7900D User Manual

15 JLCD1: LCD Power Description CMOS1 3.3V(Default) 1-2 5V 2-3 JLVDS1: LVDS 2x20 1.25mm Connector Pin No. Description Pin No. Descripti

Strany 9 - 2 System Components

16 MPCI1::::Mini-PCI Connector Pin Description Pin Description Pin Description Pin Description 1 NC 63 VCC3 2 NC 64 FRAME# 3 NC 65 TP

Strany 10

17 MPCIE1::::Mini-PCIE Connector Pin # Signal Name Pin # Signal Name 51 Reserved 52 +3.3V 49 Reserved 50 GND 47 Reserved 48

Strany 11

18 3 Hardware Installation Guide 3.1 LEC-7900D Embedded System LEC-7900D Embedded System Outlook 3.1.1 Begin Installation U

Strany 12 - Assignment

LEC-7900D User Manual 1 LEC-7900D Manual Version 1.0 : Jane 24, 2011 Copyright 2007, Lanner Electronics, Inc. All rights reserved.

Strany 13

19 3.1.2 System Memory Installation Install the memory module into the socket and push it firmly down until it is fully seated. 3.1.3 SIM

Strany 14

20 3.1.4 CompactFlash Card Installation Carefully insert the CompactFlash card into the slot as shown in the illustration above.

Strany 15

21 3. Plug the Serial ATA cable to the SATA Connector (SATA 1) 4. Plug the Power cable to the 4-Pin Power Conn

Strany 16 - JLCD1: LCD Power

22 5. Secure with 4 screws from the mother Board.

Strany 17 - :Mini-PCI Connector

23 3.1.6 Heat sink Installation 1. Remove LEC-7900D Heat sink. 2. Install CPU

Strany 18 - :Mini-PCIE Connector

24 3. Secure with 4 screws from the mother Board and 2 screws for the FAN fix. 4. Plug the Cooler cable to the FA

Strany 19 - Installation

25 3.1.7 Mini-PCIexpress Socket Installation 1. Mini-PCIexpress Socket for 3G mini-card module or WiFi mini-card module 3.1.8 System Comple

Strany 20

26 Appendix A. Watchdog Timer Introduction Most systems need to be self-reliant. If an error should occur it is typically not possible to wait

Strany 21

27 ***************************************************** if( strcmp(argv[1], "-wr") == 0 ) { if( argc != 3 ) {

Strany 22

28 return 0; } //;********************* Exit SIO ***************************************************** int Exit_Configuation() { ou

Strany 23

LEC-7900D User Manual 2 Safety Guidelines Follow these guidelines to ensure general safety:  Keep the chassis area clear and dust-free during and

Strany 24 - 2. Install CPU

29 Appendix B. Digital I/O Introduction The Digitanl I/O on the rear panel is designed to provide the input and output operations for the syste

Strany 25

30 { temp8 = (read_w83627UHG_reg(0x07, 0xE1) >> 4) & 0x01; //;Read GPI34=? delay(50); if(temp8 == 1) {

Strany 26

31 //;Set GPO32 to 1 delay(50); for(temp6=1; temp6<50; temp6++) { temp8 = (read_w83627UHG_reg(0x07, 0xE1) >> 6)

Strany 27 - Appendix A. Watchdog Timer

32 return 0; } //;********************* Read SIO ***************************************************** int read_w83627UHG_reg(int LDN, int re

Strany 28

33 // 0 = correct SuperIO int detect_sio(void) { //check the SuperIO version if(read_w83627UHG_reg(0,CR20_REG)==W83627UHG_ID) retur

Strany 29

34 Terms and Conditions Date:2001.01.06 Warranty Policy : 1. All products are under warranty against defects in materials and workmansh

Strany 30 - Appendix B. Digital I/O

35 RMA Service Request Form When requesting RMA service, please fill out the following form. Without this form enclosed, your RMA cannot be p

Strany 31

LEC-7900D User Manual 3 EMC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pur

Strany 32

LEC-7900D User Manual 4 SAFETY GUIDELINES ...

Strany 33

LEC-7900D User Manual 5 1 Product Overview 1.1 Product Introduction Front Panel Back Panel

Strany 34

LEC-7900D User Manual 6 1.2 Specifications FEATURE DESCRIPTION LEC-7900D Form Factor Embedded System Processor Intel Core 2 Duo, Celeron M (Sock

Strany 35 - Terms and Conditions

LEC-7900D User Manual 7 Internal CF 1 DC-in Connector Type Phoenix Contact 2-pin, DC Jack (MP Version) Expansion Mini-PCIe x 1 Watchdog timer Y

Strany 36 - RMA Service Request Form

LEC-7900D User Manual 8 2 System Components 2.1 Block Diagram

Komentáře k této Příručce

Žádné komentáře